PrimaFIX – bed adhesive

June 19, 2019

PrimaFIX – the best and easiest solution for effortless printing on printers
with a heated build plate.

PrimaFIX works with the most common materials on the market such as PLA,
PET-G, ABS, Wood and Flex.
When you use PimaFIX you should do so with a printer that has a heated build
plate as the active
substance in PrimaFIX activates when the temperature rises above 40 degrees.

When the print is finished and the build plate cools down you can easily remove
your object from the plate.
Thanks to the special applicator pad it´s very easy to get an even coating on your
build surface.

After use you can wipe or wash the build plate with some luke-warm water.

Also in News

New product

The wonders of PLA Chameleon

December 15, 2021

Chameleon is a new filament from PrimaCreator with a unique look. The filament is made up from two strands of filament which results in a print that has dual colors. The effect is stunning as the print seems to “change color” as you turn it and the light reflects in different ways

Water washable resin

June 11, 2020

This resin doesn’t require any chemicals for removing uncured material from the print. Just rinse in regular tap water, and it comes out clean and ready to be cured.
This, of course, is the best choice for both you and the environment.