PrimaSelect™ PLA Glossy

  • PrimaSELECT™ PLA Glossy is a very nice 3D Print material, it's non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it's easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool. 

    • 750 gr on the spool
    • Very easy to print with
    • Excellent layer adhesion
    • Unique metallic look, very glossy
    • FDA approved
    • Made from 100% virgin PLA pellets
    • Excellent mechanical properties
    • Better heat resistance than normal PLA

10+ in stock - Will be shipped the next day

Size
Weight
Color
Nebula Purple
Ancient Gold
Antique Copper
Liquid Silver
Chopstick Red
Ocean Blue
Jungle Green
Industrial Grey
Polar White

  • PrimaSELECT™ PLA Glossy is a new type of PLA that is much stronger than regular PLA and has a heat resistance up to 75°C. This means that you can use it for mechanical parts, as well as parts that you can use in (for example) a hot car during summer without the risk of the print going soft.


    PLA Glossy is a unique filament due to it’s shiny surface. It will produce prints with an extremely shiny/metal finish that really stands out.


    PLA Glossy is used the same way as regular PLA but with a slightly higher temperature range. The print temperature should be between 210 – 230°C (typical is 220°C). The filament should be used with a heated build plate for best results and depending on size of the print you, can use it with a range of 20 – 90°C (typical is 60°C) Use normal print speed 40-60 mm/s.


    We recommend that you use PrimaFIX on you build surface for best adhesion and to avoid warping.


    Why should I use PrimaSELECT™ PLA Glossy?

    • 750 gr on the spool
    • Very easy to print with
    • Excellent layer adhesion
    • Unique metallic look, very glossy
    • FDA approved
    • Made from 100% virgin PLA pellets
    • Excellent mechanical properties
    • Better heat resistance than normal PLA
  •  

    Technical data
    Material PLA
    Diameter 1.75mm
    Tolerance
    ± 0.05 mm
    Heated build platform required
    20-90°C
    Print Temperature
    210 - 230 °C
    Weight Filament
    750 g
    Spool Size
    200 x 55 mm
    Spool Hub Diameter
    53 mm

     


  • Settings