PrimaSelect™ ABS
€29.90 Incl. VAT
-
PrimaSELECT™ABS (Acrylonitrile Butadiene Styrene) is a material that is widely used in both industry and as filament for 3D Printers. It´s strong, light weight and very durable. The well-known Lego blocks are made from ABS and as you know that is a very high impact resistant piece of plastic and the same goes for parts printed with PrimaSELECT™ABS.
-
- High impact strength
- Easy to use
- Very good layer adhesion
- Higher melting point than PLA
- No hazardous fumes
- Based on RAL color system
PrimaSelect™ ABS
€14.90 Incl. VAT
-
SELECT NylonPower Carbon Fiber is the latest generation of high performance material for your 3D Printer. Our SELECT NylonPower is based on Nylon 12 and is reinforced with 20 % carbon fibers. This makes for an extremely tough filament that is perfect for printed parts that can be used in the automotive industry, drones and RC parts.
-
- High chemical and thermal resistance
- Excellent surface quality
- Less warping than regular nylon
- Easy to print
- Creates very strong parts.
View full product details
PrimaSelect™ ABS Flame Retardant
€44.90 Incl. VAT
-
Flame Resistant / Retardant thermoplastic filament is a premium grade material that is well suited for demanding 3D printing application where flame resistance is preferred or required (Electrical appliances/products, automobile parts, etc.) or where there is potential that a flame could ignite the plastic.
-
- High impact strength due to high mix of Polycarbonate
- Easy to use
- Very good layer adhesion
- Contains no halogen
- Meets the UL-94 V0 standard
PrimaSelect™ ABS+
€29.90 Incl. VAT
-
PrimaSELECT™ABS+ is the next generation of ABS filament. With this filament you will experience far less warping and cracking. You will also discover that PrimaSELECT™ABS+ has a near perfect layer adhesion which, of course, leads to more beautiful prints. The mechanical properties are also enhanced to make PrimaSELECT™ABS+ extra strong. This filament is the perfect choice when you are looking to print objects that requires high strength and very high impact tolerance.
-
- Very high impact strength
- Improved mechanical properties
- Extremely good layer adhesion
- Higher melting point than PLA and regular ABS
- No hazardous fumes
PrimaSelect™ ASA+
€27.93 Incl. VAT
-
Beat harsh conditions with PrimaSelect ASA+ (Acrylonitirle Styrene Acrylate) filament. Especially developed to be used in demanding environments where you need UV and water resistance, thermal stability and improved chemical resistance. So if you are looking for a tougher replacement to ABS you have found it!
-
- UV Resistant – 10x better than ABS makes
ASA+ perfect for parts to be used outside - Good chemical resistance and long termheat
resistance - High outdoor weatherability; it retains
gloss, color, and mechanical properties in
outdoor exposure - Very nice matte finnish with good interlayer
adhesion for maximum strenght
- UV Resistant – 10x better than ABS makes
PrimaSelect™ FLEX
€2.48 Incl. VAT
-
PrimaSELECT™Flex is a new type of Thermoplastic Co-Polyester (TPC) with very rubber – like characteristics. This material is perfect when you need a strong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid but still pliable.
-
- High flexibility with a shore hardness of 45D
- Good resistance to chemicals
- High UV resistance
- Good heat resistance
PrimaSelect™ HIPS
€14.95 Incl. VAT
-
PrimaSELECT™HIPS (High Impact Polystyrene) is a filament usually associated with ABS in the role of support material as it dissolves in D’limonene. HIPS is a very good filament on its own and you can make stunning prints with a beautiful matt surface finish. PrimaSELECT™HIPS has much more to offer as a truly high quality print material and not just as a support material. High Impact Polystyrene, as the name suggests, is a sturdy and reliable filament that is widely used among hobby enthusiasts to create models of different sizes. It has limited warping, almost no shrinkage and are very easy to glue together with other parts. You can use ordinary super glue and it´s also perfect if you want to sand and paint your model.
-
- Perfect for usage as support material – solvable in D’limonene
- Very high impact resistance
- Good for very detailed prints
- Perfect for large prints with a matt finish
- Limited warping
- Easy to print
PrimaSelect™ PLA
€1.98 Incl. VAT
-
PrimaSELECT™ PLA is a very nice 3D Print material, it´s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it’s easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool. Polylactic acid (PLA) is a bio-degradable polymer that is produced from lactic acid, which can be fermented from crops such as corn.
-
- Up to 12 times tougher than regular PLA
- Very easy to print, even at low temperatures
- Very small risks for warping
- It´s biodegradable
- No unpleasant smell