PrimaSelect™ ABS
€29.90 Incl. VAT
-
PrimaSELECT™ABS (Acrylonitrile Butadiene Styrene) is a material that is widely used in both industry and as filament for 3D Printers. It´s strong, light weight and very durable. The well-known Lego blocks are made from ABS and as you know that is a very high impact resistant piece of plastic and the same goes for parts printed with PrimaSELECT™ABS.
-
- High impact strength
- Easy to use
- Very good layer adhesion
- Higher melting point than PLA
- No hazardous fumes
- Based on RAL color system
PrimaSelect™ ABS
€14.90 Incl. VAT
-
SELECT NylonPower Carbon Fiber is the latest generation of high performance material for your 3D Printer. Our SELECT NylonPower is based on Nylon 12 and is reinforced with 20 % carbon fibers. This makes for an extremely tough filament that is perfect for printed parts that can be used in the automotive industry, drones and RC parts.
-
- High chemical and thermal resistance
- Excellent surface quality
- Less warping than regular nylon
- Easy to print
- Creates very strong parts.
View full product details
PrimaSelect™ PLA
€1.98 Incl. VAT
-
PrimaSELECT™ PLA is a very nice 3D Print material, it´s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it’s easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool. Polylactic acid (PLA) is a bio-degradable polymer that is produced from lactic acid, which can be fermented from crops such as corn.
-
- Up to 12 times tougher than regular PLA
- Very easy to print, even at low temperatures
- Very small risks for warping
- It´s biodegradable
- No unpleasant smell
PrimaSelect™ PLA Chameleon
€22.43 Incl. VAT
-
PrimaSELECT™ PLA Chameleon is a new filament from PrimaCreator with a unique look. The filament is made up from two strands of filament which results in a print that has dual colors. The effect is stunning as the print seems to “change color” as you turn it and the light reflects in different ways.
-
- Made from virgin PLA
- Changes color when you turn it or depending on light
- Comes in a variety of different color schemes
- Prints like regular PLA
- No hazardous fumes or unpleasant smell
- Made Low risk of warping
PrimaSelect™ PLA Glossy
€29.90 Incl. VAT
-
PrimaSELECT™ PLA Glossy is a very nice 3D Print material, it's non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it's easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool.
-
- 750 gr on the spool
- Very easy to print with
- Excellent layer adhesion
- Unique metallic look, very glossy
- FDA approved
- Made from 100% virgin PLA pellets
- Excellent mechanical properties
- Better heat resistance than normal PLA
PrimaSelect™ PLA Matt
€29.90 Incl. VAT
-
PrimaSELECT™ PLA Matt is a very nice 3D Print material, it's non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it's easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool.
-
- 750 gr on the spool
- No harmful fumes
- Very easy to print with temperature span of 205°C – 220°C
- Matt look, diffuses light
- Made from 100% virgin PLA material
- Ideal for artists and makers