PrimaSelect™ ASA+

  • Beat harsh conditions with PrimaSelect ASA+ (Acrylonitirle Styrene Acrylate) filament. Especially developed to be used in demanding environments where you need UV and water resistance, thermal stability and improved chemical resistance. So if you are looking for a tougher replacement to ABS you have found it!

    • UV Resistant – 10x better than ABS makes
      ASA+ perfect for parts to be used outside
    • Good chemical resistance and long termheat
      resistance
    • High outdoor weatherability; it retains
      gloss, color, and mechanical properties in
      outdoor exposure
    • Very nice matte finnish with good interlayer
      adhesion for maximum strenght

10+ in stock - Will be shipped the next day

Size
Color
Black
Dark Blue
Red
White

    • Beat harsh conditions with PrimaSelect ASA+ (Acrylonitirle Styrene Acrylate) filament. Especially developed to be used in demanding environments where you need UV and water resistance, thermal stability and improved chemical resistance. So if you are looking for a tougher replacement to ABS you have found it! ASA+ has a low-gloss matte finish which makes it perfect for technical prints where you really need to see all the details.

      UV Resistant

      ASA+ can withstand UV light 10x better than ABS and this makes ASA+ perfect for parts to be used outdoors where it will be exposed to the sun.

      Toughness

      Higher long-term heat resistance, and better chemical resistance. ASA+ is significantly more resistant to environmental stress then most other materials and that is why it has been used in the auto and marine industry for many years.

      Printing with ASA+

      If you can print ABS you can print ASA+. Prints with temperature around 230 – 255 °C with your heatbed set to about 80 – 100 °C. Perfect for applications like, automotive parts, outdoor furniture, technical parts, sensor housings or just on prints where you dont want a glossy surface.

      Tip If you print at the higher end of the temperatur scale you will have a stronger finished product.

    • Dimensions

      Size: Ø tolerance Roundness
      1,75 mm ±0,05 mm ≥ 95 %
      2,85 mm ±0,10 mm ≥ 95 %

      Physical properties

      Description: Testmethod Typical value
      Specific gravity ISO 1183 1,10g/cc
      MFR 260°C / 5kg ISO 1133 45 g/10 min*
      Tensile strength ISO 527 48 MPa
      Elongation at break ISO 527 15 %
      Tensile modulus ISO 527 2020 MPa
      Impact strength
      – Charpy notched 23°C
      ISO 179 18 KkJ/m2

      Thermal properties

      Description: Testmethod Typical value
      Printing temp. 230 - 255 °C
      Printbed Temperature Recomended 80 - 100 °C
      Melting temp. ISO 294 228°C ±10°C
      Vicat softening temp ISO 306 + 98 °C
    • Tip If you print at the higher end of the temperatur scale you will have a stronger finished product.