PrimaSelect™ ABS

  • PrimaSELECT™ABS (Acrylonitrile Butadiene Styrene) is a material that is widely used in both industry and as filament for 3D Printers. It´s strong, light weight and very durable. The well-known Lego blocks are made from ABS and as you know that is a very high impact resistant piece of plastic and the same goes for parts printed with PrimaSELECT™ABS.

    • High impact strength
    • Easy to use
    • Very good layer adhesion
    • Higher melting point than PLA
    • No hazardous fumes
    • Based on RAL color system

10+ in stock - Will be shipped the next day

Size
Weight
Color
Natural
Black
White
Light Blue
Red
Wine Red
Light Green
Yellow
Orange
Silver
Magenta
Bronze
Dark Grey
Grey
Purple
Brown
Dark Blue
Green
Glow in the Dark Green

  • Quality

    PrimaSELECT™ABS (Acrylonitrile Butadiene Styrene) is a material that is widely used in both industry and as filament for 3D Printers. It´s strong, light weight and very durable. The well-known Lego blocks are made from ABS and as you know that is a very high impact resistant piece of plastic and the same goes for parts printed with PrimaSELECT™ABS.


    Easy to use

    PrimaSELECT™ABS is a very “easy to use” material and has a matte surface finish when printed. This ABS also has limited risk of warping when comparing to other brands of ABS. PrimaSELECT™ABS comes in a wide range of vivid colors that are all based on the RAL color system which in turns guarantees that you will get the same color every time you order a new spool.


    Great results

    With PrimaSELECT™ABS we have succeeded in making an ABS that are very easy to print with and gives you stunning result every time. This filament has a very high impact strength and are perfect for printing tools, toys and different gadgets. Thanks to the relative high melting temperature (± 103˚C) PrimaSELECT™ABS is also suitable for prints that are going to be used in hot environments. If you have a dual hot-end set up and are going to print with support we recommend that you use PrimaSELECT™PVA, that bonds well to our ABS and are easy to remove, PrimaSELECT™PVA is even soluble in water.


    • When printing with PrimaSELECT™ABS we recommend that you use a heated bed to limit warping and shrinkage. Set your heat bed to ± 90-110˚C for best results.
    • PrimaSELECT™ABS sticks on BuildTak or glass plate coated with adhesive spray or glue stick.
    • PrimaSELECT™ABS is reeled on a transparent spool with 750 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister.
    • PrimaSELECT™ABS are available in diameter sizes of 1.75 mm and 2.85 mm.

    Tight diameter and roundness tolerance

    Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.


    Why should I use PrimaSELECT™ABS?

    • High impact strength
    • Easy to use
    • Very good layer adhesion
    • Higher melting point than PLA
    • No hazardous fumes
    • Based on RAL color system
  • Dimensions

    Size: Ø tolerance Roundness
    1,75 mm ±0,05 mm ≥ 95 %
    2,85 mm ±0,10 mm ≥ 95 %

    Physical properties

    Description: Testmethod Typical value
    Specific gravity ASTM D1505 1,24 g/cc
    MFI 6,0 g/10 min
    Tensile strength ASTM D882 110 MPa (MD)
    n145 MPa (TD)
    Elongation at break ASTM D882 160% (MD)
    n100% (TD)
    Tensile modulus ASTM D882 3310 MPa (MD)
    n3860 MPa (TD)
    Impact strength 7,5 KJ/m²

    Thermal properties

    Description: Testmethod Typical value
    Printing temp. 190-220 °C
    Melting temp. 210 °C ± 10 °C
    Melting point ASTM D3418 140-160 °C
    Vicat softening temp ISO 306 ± 60 °C