PrimaSelect™ PLA
€3.95 Incl. VAT
-
PrimaSELECT™ PLA is a very nice 3D Print material, it´s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it’s easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool. Polylactic acid (PLA) is a bio-degradable polymer that is produced from lactic acid, which can be fermented from crops such as corn.
-
- Up to 12 times tougher than regular PLA
- Very easy to print, even at low temperatures
- Very small risks for warping
- It´s biodegradable
- No unpleasant smell
PrimaValue™ PLA
€23.90 Incl. VAT
-
PrimaValue™ is a series of filament we developed for everyday use, perfect when you need a high quality filament in standard colors.
When Quality Counts! You should choose PrimaValue™
1 kg of high quality 3D-Print material for your 1.75 mm 3D-Printer. -
PrimaSelect™ PETG
€29.90 Incl. VAT
-
PrimaSELECT™PETG is a new and extremely tough material, it has very high impact strength, good flexibility and practically no shrinkage. PrimaSELECT™PETG is a hydrophobic (does not absorb water) filament with a high gloss. PrimaCreator offers two versions of PETG. Translucent and solid. With the translucent you will have a high gloss and almost completely transparent print depending on your shell count. The solid colors offers a vivid and beautiful surface with a high gloss finish.
-
- High clarity prints
- Very easy to print with
- Extremely strong
- Very small chance of warping
- Hydrophobic (Does not absorb water)
- FDA approved
- No unpleasant smell when printing
PrimaValue™ ABS
€23.90 Incl. VAT
-
PrimaValue™ is a series of filament we developed for everyday use, perfect when you need a high quality filament in standard colors.
When Quality Counts! You should choose PrimaValue™
1 kg of high quality 3D-Print material for your 1.75 mm 3D-Printer. -
- High strength
- Almost warp free
- Good interlayer adhesion
- Good toughness
PrimaSelect™ FLEX
€4.95 Incl. VAT
-
PrimaSELECT™Flex is a new type of Thermoplastic Co-Polyester (TPC) with very rubber – like characteristics. This material is perfect when you need a strong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid but still pliable.
-
- High flexibility with a shore hardness of 45D
- Good resistance to chemicals
- High UV resistance
- Good heat resistance
PrimaSelect™ ABS+
€29.90 Incl. VAT
-
PrimaSELECT™ABS+ is the next generation of ABS filament. With this filament you will experience far less warping and cracking. You will also discover that PrimaSELECT™ABS+ has a near perfect layer adhesion which, of course, leads to more beautiful prints. The mechanical properties are also enhanced to make PrimaSELECT™ABS+ extra strong. This filament is the perfect choice when you are looking to print objects that requires high strength and very high impact tolerance.
-
- Very high impact strength
- Improved mechanical properties
- Extremely good layer adhesion
- Higher melting point than PLA and regular ABS
- No hazardous fumes
PrimaSelect™ METAL
€7.95 Incl. VAT
-
PrimaSELECT Metal is a new exciting type of fi lament which let you take 3D-printing to a new level. In this new material we have introduced a filament that contains 80% metal powder! Needless to say, this material is as close to real metalas you can come in the filament industry for FDM/FFF printers. SELECT Metal is available in Bronze and Copper.
-
- Easy to print
- Contains 80% real metal for a genuine look and feel
- Works on most 3d-printers
- PLA based
- Easy to polish and post process
- Can print with retraction
PrimaSelect™ ASA+
€39.90 Incl. VAT
-
Beat harsh conditions with PrimaSelect ASA+ (Acrylonitirle Styrene Acrylate) filament. Especially developed to be used in demanding environments where you need UV and water resistance, thermal stability and improved chemical resistance. So if you are looking for a tougher replacement to ABS you have found it!
-
- UV Resistant – 10x better than ABS makes
ASA+ perfect for parts to be used outside - Good chemical resistance and long termheat
resistance - High outdoor weatherability; it retains
gloss, color, and mechanical properties in
outdoor exposure - Very nice matte finnish with good interlayer
adhesion for maximum strenght
- UV Resistant – 10x better than ABS makes
PrimaSelect™ PVA+
€49.90 Incl. VAT
-
PrimaSELECT™ PVA+ (polyvinyl alcohol) is a water soluble material that´s most often used as a support material.
PVA prints translucent with a slightly yellow tint. It is most often used on 3D printers with dual extruders, with one extruder printing a primary material (such as ABS or PLA) and the other printing this easily-dissolved material to provide support for overhanging features. -
- Perfect Support Material
- Water Soluble
- Works with PLA, ABS and PETG
- Excellent bonding
PrimaSelect™ ABS
€14.90 Incl. VAT
-
PrimaSELECT™ABS (Acrylonitrile Butadiene Styrene) is a material that is widely used in both industry and as filament for 3D Printers. It´s strong, light weight and very durable. The well-known Lego blocks are made from ABS and as you know that is a very high impact resistant piece of plastic and the same goes for parts printed with PrimaSELECT™ABS.
-
- High impact strength
- Easy to use
- Very good layer adhesion
- Higher melting point than PLA
- No hazardous fumes
- Based on RAL color system