PrimaSelect™ PEI Ultem 1010

  • SELECT Ultem 1010 Polyether Imide (PEI) is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. 

    • New formula makes it easy to print*
    • One of the strongest filaments on the market
    • Excellent heat resistance
    • Very high chemical resistance
    • Can be used for a wide range of applications
    • *compared with regular PEI

10 in stock - Will be shipped the next day

Color
Natural
Weight
Size

  • SELECT Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. 

    The PrimaCreator PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the PrimaCreator PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

    To make a successful PEI print there are a few things to keep in mind. The printer must have the performance to meet the PEI filament and it should be printed with a nozzle temperature of 350-380°C. The heat bed should be set to 120-160°C and a heated chamber is important to have. It´s also very important to make sure that the printer is placed in a room where there´s hardly any draft and temperature fluctuations.

    PEEK is best printed on a PEI sheet at a printing speed of 15-30 mm/s. For further information, check the TDS

  •  Essential Data:

     Material

    Polyether Imide

     Diameter  1.75mm
     Tolerance  ± 0.05 mm
     Heated build platform required  Yes, 120-160° C
     Print Temperature  355 - 390° C
     Recommended Print Speed  15-30 mm/s
     Weight Filament  500 grams

    Technical data:

     Property Test method Value
     Density  ISO 1183  1,27 g/cm3
     Tensile Modulus  ISO 527  3200 MPa
     Tensile Strength  ISO 527  105 MPa
     Impact strength  ISO 180  5 KJ/m2

     

  •  

  • SELECT™ PEI Ultem 1010 Data Sheet